Remote packet capture using WireShark & tcpdump

1. First step is to create a special FIFO file using mkfifo command, where you want to see the packet capture using WireShark. This file will use to read & write simultaneously using WireShark & tcpdump. mkfifo /tmp/packet_capture 2. Second give the following ssh command on your terminal, to start the tcpdump on remote PC.…

Message on Linux terminal

Few interesting commands which can be used to send the messages on other terminal or network: 1. wall: This command is used to broadcast a message on all terminals. For e.g.: wall “Hello, message testing” or cat msg.txt | wall 2. write: This command is used to send message to a user & selected terminal…

Linux Explore

Exploring Linux

Monthly Archives: May 2010

Remote packet capture using WireShark & tcpdump

Message on Linux terminal